Backyard Tilapia Production

Tilapia is the second most important freshwater food in the Philippines. Tilapia fish pens are commonly found in almost all the major rivers and lakes in the country, including Laguna de Bay in Laguna, Taal Lake in Batangas, and Lake Buhi in Camarines Sur.

Locally, tilapia is also known as “pla-pla”.

The most important species is the Nile (Tilapia nilotica). Tilapia grows very fast and reaches a marketable weight of at least 200 grams in less than six months. A backyard fishpond for tilapia will increase family income as it’s a good quality food suitable for processing into dried, smoked, or salted dried.

In the dining table, culinary uses of tilapia includes fried, grilled, sinigang (a sour soup using tamarind, guava, calamansi or other natural ingredients as a base), paksiw (similar to sinigang, only it uses vinegar) and many other recipes.

Image by PublicDomainPictures from Pixabay

For those who wish to pursue this aquaculture business, here are the details on setting up materials and procedures for operation.

Material Cost
Tilapia Fingerlings, 1200 pcs. @ P1.50 each P1,800
Chicken manure, 2 sacks @ P60/sack P120
Feeds P1,500
Fertilizers P200
Total P3,620

Materials and Equipment for Construction of Concrete Pond

Equipment Cost
Water pump, 1 unit @ P 5,000 P5,000
Mesh wire, 2 yards @ P 35/yard P70
Lift net, 1 pc. P750
Shovel, 1 pc. P150
Bolo, 1 pc. P250
Digging bar, 1 pc. P400
Plastic rope, 20 meters @ P 15/meter P300
Hollow blocks (6’x8”x16”), 720 [email protected]/pc. P6,120
Cement, 55 bags @ P 203.00/bag P11,165
PVC pipe (4”), 1 pc. P530
Steel bar (12mm), 3 pcs @ P 110.00/pc. P330
Tie wire, 1 kg P50
Sand, 4 cu. m. @ P 1, 700/ 2 cu. m. P3,400
Big basins, 8 pcs @ P 280.00 P2,240
TOTAL P 30,745

Fishpond Selection and Preparation

  1. Select Fishpond with the following characteristics:
    • Clay soil to hold water.
    • Water is accessible throughout the year and can be sourced from river, spring, deep well, rain or tap water.
    • It must be free from pesticide contamination and pollution.
    • The site is elevated for water to flow easily.
    • Pond size could be 30-200 sqm. initially and can be expanded as the fish population increases.
  2. Level the bottom of the pond to prevent seepage.
  3. Conduct pond treatment only in concrete ponds to remove the toxic effect of cement. Do this by washing, flooding, and draining the pond at least three (3) times.
  4. Fertilize with organic fertilizer (chicken manure) at a rate of 1kg/sqm.
  5. Fill the pond with water at an initial depth of 5-10cm after the application of organic fertilizer for a week. This would allow the growth of algae to serve as natural feed for
    the fish. Growth can be observed through the greenish coloration of water.
  6. Fill the pond with water to the desired level between 1 m to 1.5 m.
  7. To ensure no fish will escape, fine-meshed wire should screen the drainage area (pipe).

Fish stocking

  1. Stock during the early morning or late in the afternoon when the water is cool to avoid the weakening of the fish. Care should be maintained. Choose pure quality stocks
    and do not allow them to crossbreed with other species to preserve their genetic quality.
  2. Deliver the fingerlings to the pond in oxygenated plastic bags to ensure maximum survival of the fingerlings.
  3. To assimilate water in plastic bags, open the plastic bags of fingerlings to float within the pond from 30 minutes to one hour. Open the plastic bags in water to allow the fingerlings to swim freely.
  4. Stock the ponds of at least 6 fingerlings/sqm. The ratio is 1 male is to 3 females. Avoid pairing many male tilapias because this tends to slow down the production of fingerlings since they tend to eat their fingerlings due to lack of feed.

Care and Maintenance

  1. Feed the tilapias twice daily (morning and afternoon) in one portion of the pond. Supplement feeds with fine rice bran, bread crumbs, earthworms, and others at an initial
    rate of 5% of the total body weight of the fish.
  2. Maintain natural fish food by adding more fertilizer every week. Place chicken droppings in sacks and suspend in the water at every corner of the pond. Put 2.5 kg of chicken manure per bag.
  3. Maintain a water depth level of 1-1.5 meters.
  4. Gradually remove excess fingerlings after the third month of stocking. Retain 6 fingerlings/sqm. Excess fingerlings can be used in the manufacture of fish meal
    and as an ingredient for livestock and poultry needs.
  5. Plant kangkong and gabi at one portion of the pond to provide shade for the fish during hot weather and to serve as growing media for natural fish food. Water lily also provides shade. However, do not cover the pond with plants as these will interfere with the natural food production process.
  6. Prevent seepages and leakages by patching them with muds. Clear the pond dikes with weeds.
  7. Plant trees and grass near the dike to avoid erosion and avoid dumping of garbage.

Fish harvesting

  1. Introduce catfish to the pond to control the population of small fishes for at least three months before harvest. After 4-6 months, tilapias weigh 200-400 grams and are
    ready for harvest.
  2. Drain the pond totally and allow fish to accommodate the lowest portion in the drainage area for easy harvesting. After harvesting, stock the pond again.

 

Comments